Formtek Metal Forming, Inc. announces the promotion of Jack Pennuto Jr. to the position of Director of Sales and Marketing. Pennuto has had experience in the roll forming industry as a Sales Engineer and Sales Manager for Formtek and previously as a Project Engineer/Manager and tooling designer at Roller Die + Forming. He will be responsible for establishing selling strategies for the Yoder, Dahlstrom, Tishken Forming and Fabricating Lines, B&K Metal Construction Products and the Winpro Fenestration products, managing the Aftermarket parts and services group, as well as interfacing Cleveland's marketing and application engineering efforts with the Formtek Group's network of Regional Sales Managers and independent representatives.

Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply it's customers with the highest quality equipment, parts and service available in the industries it serves.

Visit the Formtek website (www.formtekgroup.com) for additional information on products, services and employment opportunities available.

Jack_Pennuto_Jr_.pdf

Formtek Metal Forming, Inc. announces the promotion of Jack Pennuto Jr. to the position of Director of Sales and Marketing. Pennuto has had experience in the roll forming industry as a Sales Engineer and Sales Manager for Formtek and previously as a Project Engineer/Manager and tooling designer at Roller Die + Forming. He will be responsible for establishing selling strategies for the Yoder, Dahlstrom, Tishken Forming and Fabricating Lines, B&K Metal Construction Products and the Winpro Fenestration products, managing the Aftermarket parts and services group, as well as interfacing Cleveland's marketing and application engineering efforts with the Formtek Group's network of Regional Sales Managers and independent representatives.

Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply it's customers with the highest quality equipment, parts and service available in the industries it serves.

Visit the Formtek website (www.formtekgroup.com) for additional information on products, services and employment opportunities available.

Jack_Pennuto_Jr_.pdf

Formtek Metal Forming, Inc. announces the promotion of Jack Pennuto Jr. to the position of Director of Sales and Marketing. Pennuto has had experience in the roll forming industry as a Sales Engineer and Sales Manager for Formtek and previously as a Project Engineer/Manager and tooling designer at Roller Die + Forming. He will be responsible for establishing selling strategies for the Yoder, Dahlstrom, Tishken Forming and Fabricating Lines, B&K Metal Construction Products and the Winpro Fenestration products, managing the Aftermarket parts and services group, as well as interfacing Cleveland's marketing and application engineering efforts with the Formtek Group's network of Regional Sales Managers and independent representatives.

Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply it's customers with the highest quality equipment, parts and service available in the industries it serves.

Visit the Formtek website (www.formtekgroup.com) for additional information on products, services and employment opportunities available.

Formtek Metal Forming, Inc. announces the promotion of Jack Pennuto Jr. to the position of Director of Sales and Marketing. Pennuto has had experience in the roll forming industry as a Sales Engineer and Sales Manager for Formtek and previously as a Project Engineer/Manager and tooling designer at Roller Die + Forming. He will be responsible for establishing selling strategies for the Yoder, Dahlstrom, Tishken Forming and Fabricating Lines, B&K Metal Construction Products and the Winpro Fenestration products, managing the Aftermarket parts and services group, as well as interfacing Cleveland's marketing and application engineering efforts with the Formtek Group's network of Regional Sales Managers and independent representatives.

Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply it's customers with the highest quality equipment, parts and service available in the industries it serves.

Visit the Formtek website (www.formtekgroup.com) for additional information on products, services and employment opportunities available.

Jack_Pennuto_Jr_.pdf

Formtek Metal Forming, Inc. announces the promotion of Jack Pennuto Jr. to the position of Director of Sales and Marketing. Pennuto has had experience in the roll forming industry as a Sales Engineer and Sales Manager for Formtek and previously as a Project Engineer/Manager and tooling designer at Roller Die + Forming. He will be responsible for establishing selling strategies for the Yoder, Dahlstrom, Tishken Forming and Fabricating Lines, B&K Metal Construction Products and the Winpro Fenestration products, managing the Aftermarket parts and services group, as well as interfacing Cleveland's marketing and application engineering efforts with the Formtek Group's network of Regional Sales Managers and independent representatives.

Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply it's customers with the highest quality equipment, parts and service available in the industries it serves.

Visit the Formtek website (www.formtekgroup.com) for additional information on products, services and employment opportunities available.

New product literature is now available on our website for our updated products:

• Classic Baseboard
• Panel Trim II Baseboard
• Lo-Trim II Baseboard
• Slope-Pak

Literature is available on our website, www.argobaseboard.com, under "Catalogs"

SmartPak^® - A smart solution to environmental awareness

The average duct system loses between 25% and 40% of the energy generated by the air handler, an issue caused by leaks in the system or because of the material used. More energy is then necessary to achieve the desired temperature.

These same flaws can also contribute to poor indoor air quality, drawing in harmful particles or fostering mold growth that can be delivered throughout the home. SmartPak System Duct is specially designed to prevent the loss of energy, reducing overall energy consumption, and also to deliver clean, healthy air throughout the home. These special seals are also simple to install, reducing the contractor's time on the job.

• 100% leak resistant
• Reduced thermal conductivity
• Resistant to mold and mildew growth
• Contains up to 40% recycled materials
• 100% recyclable

For more information, download the SmartPak brochure

hidingductwork.pdf

Turn-of-the-Century and pre-war houses have their charm, but lack of central cooling and heating systems. SpacePak systems can be installed without injuring the aesthetics (and decorative-plaster surfaces) of a period interior.

See the attached PDF for the full story.

geothermal.pdf

This three-story home features cathedral ceilings, an open floor plan, challenging angles, and a walkout basement with sunroom. The steady heat delivered by the ground-source heat pump and the location of the high-velocity air outlets in the ceiling, walls, and floors, is designed to deliver comfort to all levels of the home.

Read the attached PDF for the whole story.

indoorcomfort.pdf

The EnergyWise home is a showcase for energy-efficient design ideas, high performance building materials, and environmentally sound products that outperform traditional building products in any building or remodeling project.
"SpacePak was chosen because no other system can provide such superior comfort, efficiency and ease of installation"

Read the attached PDF for the full story

ZonePak^® - Delivering the right level of warmth and cooling to the spaces you choose, saving energy and money

ZonePak is the smart solution for delivering controlled comfort throughout your environment. Its unique, air-driven damper system is guided by multiple independent, pre-programmed thermostats, creating up to three separate zones of unparalleled comfort while utilizing a single air handler. The select delivery of conditioned air satisfies thermostat needs quickly, allowing the air handler to run more efficiently and reducing overall energy consumption and costs.

A good fit for any structure

ZonePak's applications extend to almost any structure: multi-family or multi-floor dwellings, commercial or retail developments, retrofits or new constructions can all benefit from its unique, energy-efficient technology.

Download the ZonePak brochure for more information

Airtherm to expand Forrest City facility

HVAC manufacturer will add several new lines, 45 new jobs

FORREST CITY, Arkansas (September 22, 2009) – Officials of Mestek Inc, the parent company of  Airtherm in Forrest City, manufacturer of fan coil units and fan coils for the HVAC industry, today announced plans to add several new lines to its existing facility, along with 45 new jobs. The product lines being added in Forrest City will include cabinet unit heaters, panel radiators, electric baseboard units, fire dampers, fire/smoke dampers, air control dampers, roof curbs, and gravity roof ventilators.

     Vice President of Manufacturing Services states that “Mestek Inc has 17 facilities in North America. We chose to relocate several of our product lines to our Forrest City plant because of the business friendly attitude of state and local officials as well as the availability of skillful and motivated workers.”

     “We are delighted over this expansion” said Forrest City Mayor Gordon McCoy. “During these difficult times, it’s great to see people investing in our economy and our community. “We are behind Airtherm 110 percent and will do everything we can to support them.”

     Airtherm currently employs 40 in Forrest City. The addition of the new lines will bring total employment to 85. Manufacturing of product off the new lines is expected to start immediately and should be completed by March, 2010.

     “The creation of new jobs through existing Arkansas companies is always exciting,” said Maria Haley, AEDC executive director. “We appreciate the commitment Airtherm has made to Forrest City and its workforce and look forward to the company’s continued success.”

     Mestek, Inc. is the parent company of Airtherm, which is headquartered in Westfield. Massachusetts.     

     Additional information can be found at www.airthermhvac.com or www.mestek.com.

###

ThermaPak^® - 93% efficient condensing boiler and domestic hot water package

SpacePak presents the ThermaPak boiler. This space saving wall hung compact boiler unit provides high efficient heating for all hydronic baseboard and radiant systems ranging from 30 to 160 MBH. It also boasts a domestic hot water production of over 4 gallons per minute.

• More information about the ThermaPak Boiler
• ThermaPak Literature

Download our beautiful new Classic Architechturally Designed Enclosures Catalog by visiting our Literature Library today!

DADANCO has released new and updated literature.  Please click on the Active Chilled Beam link below to access the new literature.    

http://www.dadanco.com/ACB/air_conditioning_literature.asp?productLineID=30